8 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron 80 MK32001–2003No measured PTO figureTractor twoMassey Ferguson MF 5410 A2011–2014No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 80 MK3 and the MF 5410 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Agrotron 80 MK3 | MF 5410 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74 hp | — |
| Engine declared | Deutz BF 4 M 1012 E | Perkins 1104 D-44 T | differs |
| Displacement declared | 3.19 L | 4.40 L | +38% MF 5410 A |
| Maximum torque declared | 218 lb·ft · 296 N·m | 229 lb·ft · 310 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Hydraulically operated wet ZF multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 21.9 gpm · 83.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,752 lb · 3,970 kg | 8,378 lb · 3,800 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | 18,739 lb · 8,500 kg | +31% MF 5410 A |
| Wheelbase declared | 95.2 in · 2,419 mm | 97.0 in · 2,464 mm | — |
| Length declared | 157.7 in · 4,005 mm | 166.2 in · 4,221 mm | +5% MF 5410 A |
| Width declared | 81.1 in · 2,060 mm | 60.4–80.1 in · 1,533–2,034 mm | differs |
| Ground clearance declared | 18.7 in · 475 mm | 15.4 in · 390 mm | +22% Agrotron 80 MK3 |
| Fuel tank declared | 190.2 qt · 180 L | 137.4 qt · 130.0 L | +38% Agrotron 80 MK3 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 80 MK3 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”
- Source: Traktorenlexikon, “Fendt Farmer 307 C”
Massey Ferguson MF 5410 A sources
- Source: Traktorenlexikon, “Massey Ferguson MF 5410”