10 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrotron 6150.4from 2012No measured PTO figureTractor twoNew Holland TM 155 (Traktorenlexikon)2002–2007No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (2012–2012; 2002–2007). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 6150.4 and New Holland TM 155 (Traktorenlexikon), field by field
FieldAgrotron 6150.4TM 155Gap
Engine
Engine power, claimed claimed151.3 hp153 hp—
Engine declaredDeutz AG TCD 4.1 L04 4VNEW HOLLAND 675-TA/HAdiffers
Displacement declared4.04 L7.48 L+85% TM 155
Maximum torque declared446 lb·ft · 605 N·m462 lb·ft · 627 N·m—
Transmission
Top speed declared24.9 mph · 40 km/h24.9 mph · 40 km/h—
Clutch declared—Electro-hydraulically operated multi-plate wet clutch—
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared21.9 gpm · 83.0 L/min32.1 gpm · 121.7 L/min+47% TM 155
Rear PTO speeds declared540 rpm / 1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared12,125 lb · 5,500 kg12,919 lb · 5,860 kg+7% TM 155
Maximum permissible mass declared—19,842 lb · 9,000 kg—
Wheelbase declared95.2 in · 2,419 mm107.2 in · 2,723 mm+13% TM 155
Length declared178.9–187.9 in · 4,545–4,772 mm227.9 in · 5,789 mmdiffers
Width declared81.4–99.5 in · 2,068–2,527 mm92.5 in · 2,350 mmdiffers
Ground clearance declared18.1–21.9 in · 460–555 mm15.4 in · 390 mmdiffers
Turning radius, braked declared—17.1 ft · 5.20 m—
Fuel tank declared243.0 qt · 230 L301.2 qt · 285.0 L+24% TM 155

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrotron 6150.4 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6150.4”

New Holland TM 155 (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “New Holland TM 155”