Deutz-Fahr Agrotron 4.70 or International Harvester 685?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron 4.70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 685 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 4.70 suits loader and hydraulic implement work better on this data: 212% (4,225 kg / 9,315 lb) more three-point lift.
  • The Deutz-Fahr Agrotron 4.70 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 4.70 and International Harvester 685, with the call on each
QuestionAgrotron 4.70685Call
Which puts more power through the PTO shaft?50.7 kW (68.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”50.7 kW (68.0 hp)Traktorenlexikon, “IHC 685 (XL)”Not comparableNot comparable on power at the PTO shaft: the Agrotron 4.70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 685 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 4.70 and the 685.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 4.70 and the 685.
Which pumps more oil for implements?66.0 L/min (17.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”No figureNo call on hydraulic flow: no figure on record for the 685.
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”1,995 kg (4,398 lb)Traktorenlexikon, “IHC 685 (XL)”AheadThe Deutz-Fahr Agrotron 4.70 has 212% more lift (4,225 kg / 9,315 lb) than the International Harvester 685 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,890 kg (8,576 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”3,040 kg (6,702 lb)Traktorenlexikon, “IHC 685 (XL)”Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 4.70 is 28% heavier (850 kg / 1,874 lb) than the International Harvester 685 (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,000 kg (13,228 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”No figureNo call on maximum permissible mass: no figure on record for the 685.
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”8 to 16Traktorenlexikon, “IHC 685 (XL)”AheadThe Deutz-Fahr Agrotron 4.70 has 31% more forward gears (5 gears) than the International Harvester 685 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 4.70 and the 685.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 4.70”25 km/h (15.5 mph)Traktorenlexikon, “IHC 685 (XL)”AheadThe Deutz-Fahr Agrotron 4.70 has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 685 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 4.70”540/1000 rpmTraktorenlexikon, “IHC 685 (XL)”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 4.70”No figureNo call on PTO independence: not stated for the 685.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 4.70”2WD / 4WDTraktorenlexikon, “IHC 685 (XL)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–19971981–1990Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 4.70 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 4.70 has 212% more lift (4,225 kg / 9,315 lb) than the International Harvester 685 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrotron 4.70 is 28% heavier (850 kg / 1,874 lb) than the International Harvester 685 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrotron 4.70 has 31% more forward gears (5 gears) than the International Harvester 685 (both forward gears, as stated by the source).
  • The Deutz-Fahr Agrotron 4.70 has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 685 (both top speed forward, as stated by the source).
  • The Deutz-Fahr Agrotron 4.70 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotron 4.70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 685 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources