Deutz-Fahr Agrotron 4.70 vs International Harvester 685

11 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

1981–1990

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 4.70 and the 685 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 4.70 and International Harvester 685, field by field
Field	Agrotron 4.70	685	Gap
Engine
Engine power, claimed claimed	68.0 hp	68.0 hp	—
Engine declared	KHD BF4M 1012 E	INTERNATIONAL-HARVESTER D-239	differs
Displacement declared	3.19 L	3.91 L	+23% 685
Maximum torque declared	198 lb·ft · 268 N·m	181 lb·ft · 245 N·m	+9% Agrotron 4.70
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	single-disc dry clutch with sintered metal lining	Pedal operated dry LAYCOCK single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	Constant flow	—	—
Pump flow declared	17.4 gpm · 66.0 L/min	—	—
Pressure declared	—	2,698 psi · 186 bar	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	4,398 lb · 1,995 kg	+212% Agrotron 4.70
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,576 lb · 3,890 kg	6,702 lb · 3,040 kg	+28% Agrotron 4.70
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	95.2 in · 2,419 mm	88.2 in · 2,240 mm	+8% Agrotron 4.70
Length declared	157.7 in · 4,005 mm	147.2 in · 3,740 mm	+7% Agrotron 4.70
Width declared	79.1 in · 2,008 mm	75.6 in · 1,920 mm	—
Height declared	107.1 in · 2,720 mm	103.1 in · 2,620 mm	—
Ground clearance declared	18.7 in · 475 mm	14.6 in · 370 mm	+28% Agrotron 4.70
Turning radius, braked declared	—	10.9 ft · 3.33 m	—
Fuel tank declared	190.2 qt · 180 L	118.3 qt · 112.0 L	+61% Agrotron 4.70

Source

Source