Deutz-Fahr Agrotron 110 MK3 vs John Deere 2900

13 material differences

Tractor one

2000–2003

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 110 MK3 and the 2900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 110 MK3 and John Deere 2900, field by field
Field	Agrotron 110 MK3	2900	Gap
Engine
Engine power, claimed claimed	103.7 hp	103.7 hp	—
Engine declared	Deutz. BF6M 1012 E	ZETOR 1301	differs
Displacement declared	4.79 L	4.16 L	+15% Agrotron 110 MK3
Maximum torque declared	306 lb·ft · 415 N·m	269 lb·ft · 365 N·m	+14% Agrotron 110 MK3
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–21.7 mph · 30–35 km/h	differs
Clutch declared	Hydraulically operated wet ZF multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	21.9 gpm · 83.0 L/min	—	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	9,833 lb · 4,460 kg	+39% Agrotron 110 MK3
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,045 lb · 5,010 kg	9,215 lb · 4,180 kg	+20% Agrotron 110 MK3
Maximum permissible mass declared	18,739 lb · 8,500 kg	16,535 lb · 7,500 kg	+13% Agrotron 110 MK3
Wheelbase declared	104.2 in · 2,647 mm	93.3 in · 2,369 mm	+12% Agrotron 110 MK3
Length declared	178.0 in · 4,520 mm	172.4 in · 4,380 mm	—
Width declared	90.7 in · 2,304 mm	82.7 in · 2,100 mm	+10% Agrotron 110 MK3
Height declared	113.0 in · 2,870 mm	106.5 in · 2,705 mm	+6% Agrotron 110 MK3
Ground clearance declared	20.5 in · 520 mm	14.2 in · 360 mm	+44% Agrotron 110 MK3
Turning radius, braked declared	—	15.2 ft · 4.62 m	—
Fuel tank declared	285.3 qt · 270 L	169.1 qt · 160.0 L	+69% Agrotron 110 MK3

Source

Source