Deutz-Fahr Agrotron 100 or Massey Ferguson MF 4360 (A)?

Which should you choose?

The figures split: the Massey Ferguson 4360 (A) is ahead on hydraulic flow and maximum permissible mass; the Deutz-Fahr Agrotron 100 is ahead on three-point lift and forward gears.

  • The Massey Ferguson 4360 (A) suits road haulage better on this data: 24% (1,800 kg / 3,968 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 100 and Massey Ferguson MF 4360 (A), with the call on each
QuestionAgrotron 100MF 4360 (A)Call
Which puts more power through the PTO shaft?67.6 kW (90.6 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 100”70.8 kW (94.9 hp)Traktorenlexikon, “Massey Ferguson MF 4360”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 100 and the MF 4360 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron 100 and the MF 4360 (A).
Which pumps more oil for implements?64.5 L/min (17.0 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 100”72.3 L/min (19.1 gpm)Traktorenlexikon, “Massey Ferguson MF 4360”AheadThe Massey Ferguson 4360 (A) has 12% more hydraulic flow (7.8 L/min / 2.1 gpm) than the Deutz-Fahr Agrotron 100 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 100”4,079 kg (8,992 lb)Traktorenlexikon, “Massey Ferguson MF 4360”AheadThe Deutz-Fahr Agrotron 100 has 52% more lift (2,141 kg / 4,720 lb) than the Massey Ferguson 4360 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,220 kg (9,304 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 100”3,871 kg (8,534 lb)Traktorenlexikon, “Massey Ferguson MF 4360”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 100”9,300 kg (20,503 lb)Traktorenlexikon, “Massey Ferguson MF 4360”AheadThe Massey Ferguson 4360 (A) has 24% higher maximum permissible mass (1,800 kg / 3,968 lb) than the Deutz-Fahr Agrotron 100 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 100”12Traktorenlexikon, “Massey Ferguson MF 4360”AheadThe Deutz-Fahr Agrotron 100 has 75% more forward gears (9 gears) than the Massey Ferguson 4360 (A) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agrotron 100 and the MF 4360 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 100”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 4360”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 100”540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 4360”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Massey Ferguson MF 4360”No figureNo call on PTO independence: not stated for the Agrotron 100.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 100”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 4360”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20012001–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 4360 (A) has 12% more hydraulic flow (7.8 L/min / 2.1 gpm) than the Deutz-Fahr Agrotron 100 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 100 has 52% more lift (2,141 kg / 4,720 lb) than the Massey Ferguson 4360 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 4360 (A) has 24% higher maximum permissible mass (1,800 kg / 3,968 lb) than the Deutz-Fahr Agrotron 100 (both maximum permissible mass, as stated by the source).
  • The Deutz-Fahr Agrotron 100 has 75% more forward gears (9 gears) than the Massey Ferguson 4360 (A) (both forward gears, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources