Deutz-Fahr Agrotrac 110 or Fendt Farmer 410 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotrac 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 410 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Farmer 410 Vario suits road haulage better on this data: 32% (12.0 km/h / 7.5 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotrac 110 and Fendt Farmer 410 Vario, with the call on each
QuestionAgrotrac 110Farmer 410 VarioCall
Which puts more power through the PTO shaft?74 kW (99 hp)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”74 kW (99 hp)Traktorenlexikon, “Fendt Farmer 410 Vario”Not comparableNot comparable on power at the PTO shaft: the Agrotrac 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 410 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotrac 110 and the Farmer 410 Vario.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotrac 110 and the Farmer 410 Vario.
Which pumps more oil for implements?58.0 L/min (15.3 gpm)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”No figureNo call on hydraulic flow: no figure on record for the Farmer 410 Vario.
Which lifts more on the three-point hitch?4,700 kg (10,362 lb) to 6,200 kg (13,669 lb)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”6,568 kg (14,480 lb)Traktorenlexikon, “Fendt Farmer 410 Vario”Not comparableNot comparable on three-point lift: the Agrotrac 110: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotrac 110”); the Farmer 410 Vario: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 410 Vario”) — not the same quantity, basis and condition.
Which is heavier, for traction?4,320 kg (9,524 lb)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”4,950 kg (10,913 lb) to 5,210 kg (11,486 lb)Traktorenlexikon, “Fendt Farmer 410 Vario”Ahead (a fact, not an advantage)The Fendt Farmer 410 Vario is 15% heavier (630 kg / 1,389 lb) than the Deutz-Fahr Agrotrac 110 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the Agrotrac 110 and the Farmer 410 Vario.
Which has the wider choice of gears?15 forwardTraktorenlexikon, “Deutz-Fahr Agrotrac 110”Stepless (CVT)Traktorenlexikon, “Fendt Farmer 410 Vario”DifferTransmissions differ in kind: the Deutz-Fahr Agrotrac 110 has 15 forward gears and the Fendt Farmer 410 Vario is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotrac 110 and the Farmer 410 Vario.
Which is faster on the road?38 km/h (23.6 mph)Traktorenlexikon, “Deutz-Fahr Agrotrac 110”50 km/h (31.1 mph)Traktorenlexikon, “Fendt Farmer 410 Vario”AheadThe Fendt Farmer 410 Vario has 32% more top speed (12.0 km/h / 7.5 mph) than the Deutz-Fahr Agrotrac 110 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotrac 110”540/540E/1000 rpmTraktorenlexikon, “Fendt Farmer 410 Vario”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the Agrotrac 110 and the Farmer 410 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotrac 110”4WDTraktorenlexikon, “Fendt Farmer 410 Vario”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–1999–2006Ahead (a fact, not an advantage)The Deutz-Fahr Agrotrac 110 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Farmer 410 Vario is 15% heavier (630 kg / 1,389 lb) than the Deutz-Fahr Agrotrac 110 (both unladen weight, as stated by the source).
  • The Fendt Farmer 410 Vario has 32% more top speed (12.0 km/h / 7.5 mph) than the Deutz-Fahr Agrotrac 110 (both top speed forward, as stated by the source).
  • The Deutz-Fahr Agrotrac 110 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Transmissions differ in kind: the Deutz-Fahr Agrotrac 110 has 15 forward gears and the Fendt Farmer 410 Vario is stepless (CVT) — not called.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrotrac 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 410 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the Agrotrac 110: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotrac 110”); the Farmer 410 Vario: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 410 Vario”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources