10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotrac 110from 2004No measured PTO figureTractor twoFendt Farmer 410 Vario1999–2006No measured PTO figure
Which should you choose?
Read our verdict on the Agrotrac 110 and the Farmer 410 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Agrotrac 110 | Farmer 410 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 99 hp | 99 hp | — |
| Engine declared | Lamborghini 1000.6 W | Deutz BF4M 2013 C | differs |
| Displacement declared | 6.00 L | 3.80 L | +58% Agrotrac 110 |
| Maximum torque declared | 288 lb·ft · 390 N·m | 322 lb·ft · 437 N·m | +12% Farmer 410 Vario |
| Transmission | |||
| Top speed declared | 23.6 mph · 38 km/h | 31.1 mph · 50 km/h | +32% Farmer 410 Vario |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 15.3 gpm · 58.0 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,524 lb · 4,320 kg | 10,913–11,486 lb · 4,950–5,210 kg | differs |
| Wheelbase declared | 103.7 in · 2,633 mm | 95.2 in · 2,417 mm | +9% Agrotrac 110 |
| Length declared | 161.5 in · 4,102 mm | 162.9–165.0 in · 4,137–4,190 mm | — |
| Width declared | 82.0–90.7 in · 2,082–2,304 mm | 89.0 in · 2,260 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 20.1–21.7 in · 510–550 mm | differs |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 147.9 qt · 140 L | 174.4 qt · 165 L | +18% Farmer 410 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotrac 110 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotrac 110”
Fendt Farmer 410 Vario sources
- Source: Traktorenlexikon, “Fendt Farmer 410 Vario”
- Source: Traktorenlexikon, “Fendt Farmer 411 Vario”