Deutz-Fahr Agrosun 100 vs VALMET 6550 HiTech

9 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1998–2006

No measured PTO figure

Which should you choose?

Read our verdict on the Agrosun 100 and the 6550 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrosun 100 and VALMET 6550 HiTech, field by field
Field	Agrosun 100	6550 HiTech	Gap
Engine
Engine power, claimed claimed	98.7 hp	98.6 hp	—
Engine declared	K.H.D. BF6L 913 T	VALMET 420 DWRE or 44 ET	differs
Displacement declared	6.13 L	4.40 L	+39% Agrosun 100
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry Valeo single disc clutch type 330	Electrically-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	18.7 gpm · 70.8 L/min	+11% 6550 HiTech
Three-point lift at ends declared	10,141 lb · 4,600 kg	12,346 lb · 5,600 kg	+22% 6550 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,759 lb · 4,880 kg	10,406 lb · 4,720 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.7 in · 2,761 mm	92.1 in · 2,340 mm	+18% Agrosun 100
Length declared	180.5 in · 4,585 mm	178.0 in · 4,520 mm	—
Width declared	92.1 in · 2,340 mm	92.9 in · 2,360 mm	—
Height declared	107.5 in · 2,730 mm	107.1 in · 2,720 mm	—
Ground clearance declared	19.3 in · 490 mm	17.1 in · 434 mm	+13% Agrosun 100
Fuel tank declared	126.8 qt · 120 L	174.4 qt · 165.0 L	+38% 6550 HiTech

Source

Source