Deutz-Fahr AgroStar 6.28 vs Massey Ferguson MF 3115 (A)

10 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1990–1993

No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 6.28 and the MF 3115 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 6.28 and Massey Ferguson MF 3115 (A), field by field
Field	AgroStar 6.28	MF 3115 (A)	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	KHD F6L 913	Perkins 1006-6 HR	differs
Displacement declared	6.13 L	5.99 L	—
Maximum torque declared	257 lb·ft · 348 N·m	305 lb·ft · 413 N·m	+19% MF 3115 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry single clutch	pedal-operated dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	14.5 gpm · 55.0 L/min	13.2 gpm · 50.0 L/min	+10% AgroStar 6.28
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	12,214 lb · 5,540 kg	+17% AgroStar 6.28
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,229 lb · 4,640 kg	9,987 lb · 4,530 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	17,637 lb · 8,000 kg	+6% AgroStar 6.28
Wheelbase declared	107.0 in · 2,718 mm	106.1 in · 2,696 mm	—
Length declared	179.4 in · 4,556 mm	170.2 in · 4,323 mm	+5% AgroStar 6.28
Width declared	97.2 in · 2,470 mm	74.8 in · 1,899 mm	+30% AgroStar 6.28
Height declared	110.9 in · 2,818 mm	109.2 in · 2,774 mm	—
Ground clearance declared	20.9 in · 530 mm	18.0 in · 457 mm	+16% AgroStar 6.28
Fuel tank declared	179.6 qt · 170 L	182.8 qt · 173 L	—

Source

Source