Deutz-Fahr AgroStar 6.28 vs John Deere 6520

8 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 6.28 and the 6520 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 6.28 and John Deere 6520, field by field
Field	AgroStar 6.28	6520	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	KHD F6L 913	John Deere PowrTech 6.068 HLA-V2 or 6.068 HL-4V/CR	differs
Displacement declared	6.13 L	6.79 L	+11% 6520
Maximum torque declared	257 lb·ft · 348 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	dry single clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	14.5 gpm · 55.0 L/min	—	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	14,881 lb · 6,750 kg	—
Rear PTO speeds declared	540/1000/750 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,229 lb · 4,640 kg	11,199–11,773 lb · 5,080–5,340 kg	differs
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	107.0 in · 2,718 mm	104.3 in · 2,650 mm	—
Length declared	179.4 in · 4,556 mm	186.1 in · 4,728 mm	—
Width declared	97.2 in · 2,470 mm	91.2 in · 2,316 mm	+7% AgroStar 6.28
Height declared	110.9 in · 2,818 mm	112.5 in · 2,858 mm	—
Ground clearance declared	20.9 in · 530 mm	22.4 in · 570 mm	+8% 6520
Fuel tank declared	179.6 qt · 170 L	218.7 qt · 207.0 L	+22% 6520

Source

Source