Deutz-Fahr AgroStar 4.68 vs Fiat 940 (DT)

9 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1978–1979

No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 4.68 and the 940 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 4.68 and Fiat 940 (DT), field by field
Field	AgroStar 4.68	940 (DT)	Gap
Engine
Engine power, claimed claimed	90 hp	90.8 hp	—
Engine declared	KHD BF4L 913	O.M.-FIAT CO 3/80	differs
Displacement declared	4.09 L	4.94 L	+21% 940 (DT)
Maximum torque declared	259 lb·ft · 351 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	—	Dry FEREDO double clutch	—
Hydraulics & hitch
Pump flow declared	13.0 gpm · 49.2 L/min	10.0 gpm · 38.0 L/min	+29% AgroStar 4.68
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	8,378 lb · 3,800 kg	—
Rear PTO speeds declared	540/1000/750 rpm	—	—
Weight & dimensions
Unladen weight declared	9,259 lb · 4,200 kg	8,708 lb · 3,950 kg	+6% AgroStar 4.68
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	96.5 in · 2,450 mm	93.3 in · 2,370 mm	—
Length declared	168.2 in · 4,272 mm	159.4 in · 4,050 mm	+5% AgroStar 4.68
Width declared	90.2 in · 2,290 mm	76.2 in · 1,935 mm	+18% AgroStar 4.68
Height declared	108.7 in · 2,762 mm	105.1 in · 2,670 mm	—
Ground clearance declared	18.3 in · 465 mm	22.4 in · 570 mm	+23% 940 (DT)
Turning radius, braked declared	—	12.6 ft · 3.84 m	—
Fuel tank declared	139.5 qt · 132 L	95.1 qt · 90.0 L	+47% AgroStar 4.68

Source

Source