Deutz-Fahr DX 4.61 vs Massey Ferguson MF 1004

7 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1978–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.61 and the MF 1004 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.61 and Massey Ferguson MF 1004, field by field
Field	DX 4.61	MF 1004	Gap
Engine
Engine power, claimed claimed	87 hp	86.9 hp	—
Engine declared	KHD BF4L 913	Perkins A 4.318.2	differs
Displacement declared	4.09 L	5.21 L	+28% MF 1004
Maximum torque declared	251 lb·ft · 340 N·m	254 lb·ft · 344 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	dry single clutch	Pedal-operated dry and air-cooled single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	—	7.2 gpm · 27.3 L/min	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	8,157 lb · 3,700 kg	—
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	9,039 lb · 4,100 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	96.5 in · 2,450 mm	95.7 in · 2,432 mm	—
Length declared	168.2 in · 4,272 mm	162.2 in · 4,120 mm	—
Width declared	90.2 in · 2,290 mm	87.8 in · 2,230 mm	—
Height declared	108.7 in · 2,762 mm	108.7 in · 2,760 mm	—
Ground clearance declared	18.3 in · 465 mm	16.3 in · 413 mm	+13% DX 4.61
Turning radius, braked declared	—	14.9 ft · 4.55 m	—
Fuel tank declared	139.5 qt · 132 L	153.2 qt · 145.0 L	+10% MF 1004

Source

Source