Deutz-Fahr AgroPrima 4.56 vs Massey Ferguson MF 3075 (A)

7 material differences · fewer than 12

Tractor one

1991–1995

No measured PTO figure

Tractor two

1993–1995

No measured PTO figure

Which should you choose?

Read our verdict on the AgroPrima 4.56 and the MF 3075 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroPrima 4.56 and Massey Ferguson MF 3075 (A), field by field
Field	AgroPrima 4.56	MF 3075 (A)	Gap
Engine
Engine power, claimed claimed	—	93.7 hp	—
Engine declared	KHD BF4L 913	Perkins 1004-4 THR2	differs
Displacement declared	4.09 L	3.99 L	—
Maximum torque declared	—	261 lb·ft · 354 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled VALEO single-plate clutch	—
Hydraulics & hitch
Pump flow declared	11.2 gpm · 42.4 L/min	13.2 gpm · 49.9 L/min	+18% MF 3075 (A)
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	11,023 lb · 5,000 kg	+32% MF 3075 (A)
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,333 lb · 3,780 kg	9,733 lb · 4,415 kg	+17% MF 3075 (A)
Maximum permissible mass declared	14,551 lb · 6,600 kg	—	—
Wheelbase declared	96.1 in · 2,441 mm	100.5 in · 2,553 mm	—
Length declared	158.7 in · 4,032 mm	179.6 in · 4,562 mm	+13% MF 3075 (A)
Width declared	81.2 in · 2,063 mm	80.7 in · 2,049 mm	—
Height declared	103.9 in · 2,640 mm	108.2 in · 2,749 mm	—
Ground clearance declared	17.7 in · 450 mm	16.9 in · 430 mm	—
Fuel tank declared	139.5 qt · 132 L	200.8 qt · 190.0 L	+44% MF 3075 (A)

Source

Source