Deutz-Fahr Agroplus 75 or New Holland 5635 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5635 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland 5635 (A) suits loader and hydraulic implement work better on this data: 17% (600 kg / 1,323 lb) more three-point lift.
  • The Deutz-Fahr Agroplus 75 suits road haulage better on this data: 15% (800 kg / 1,764 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agroplus 75 and New Holland 5635 (A), with the call on each
QuestionAgroplus 755635 (A)Call
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 75”55.2 kW (74.0 hp)Traktorenlexikon, “New Holland 5635”Not comparableNot comparable on power at the PTO shaft: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5635 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 75 and the 5635 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agroplus 75 and the 5635 (A).
Which pumps more oil for implements?—44.5 L/min (11.8 gpm)Traktorenlexikon, “New Holland 5635”No figureNo call on hydraulic flow: no figure on record for the Agroplus 75.
Which lifts more on the three-point hitch?3,600 kg (7,937 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75”4,200 kg (9,259 lb)Traktorenlexikon, “New Holland 5635”AheadThe New Holland 5635 (A) has 17% more lift (600 kg / 1,323 lb) than the Deutz-Fahr Agroplus 75 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,430 kg (7,562 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75”4,190 kg (9,237 lb)Traktorenlexikon, “New Holland 5635”Ahead (a fact, not an advantage)The New Holland 5635 (A) is 22% heavier (760 kg / 1,676 lb) than the Deutz-Fahr Agroplus 75 (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75”5,400 kg (11,905 lb)Traktorenlexikon, “New Holland 5635”AheadThe Deutz-Fahr Agroplus 75 has 15% higher maximum permissible mass (800 kg / 1,764 lb) than the New Holland 5635 (A) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?30Traktorenlexikon, “Deutz-Fahr Agroplus 75”12 to 24Traktorenlexikon, “New Holland 5635”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agroplus 75 and the 5635 (A).
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 75”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland 5635”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 75”540/540E/1000 rpmTraktorenlexikon, “New Holland 5635”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “New Holland 5635”No figureNo call on PTO independence: not stated for the Agroplus 75.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr Agroplus 75”Two-wheel or four-wheel driveTraktorenlexikon, “New Holland 5635”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20051996–1998EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland 5635 (A) has 17% more lift (600 kg / 1,323 lb) than the Deutz-Fahr Agroplus 75 (both lift at the hitch ends, as stated by the source).
  • The New Holland 5635 (A) is 22% heavier (760 kg / 1,676 lb) than the Deutz-Fahr Agroplus 75 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agroplus 75 has 15% higher maximum permissible mass (800 kg / 1,764 lb) than the New Holland 5635 (A) (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5635 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources