10 material differences · fewer than 12

Tractor oneDeutz-Fahr Agroplus 751997–2005No measured PTO figureTractor twoNew Holland 5635 (A)1996–1998No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 75 and the 5635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 75 and New Holland 5635 (A), field by field
Field	Agroplus 75	5635 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	—	Iveco 8045.05 R	—
Displacement declared	—	3.91 L	—
Maximum torque declared	218 lb·ft · 295 N·m	162 lb·ft · 220 N·m	+34% Agroplus 75
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	11.8 gpm · 44.5 L/min	—
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift, at the coupling points declared	7,937 lb · 3,600 kg	9,259 lb · 4,200 kg	+17% 5635 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,562 lb · 3,430 kg	9,237 lb · 4,190 kg	+22% 5635 (A)
Maximum permissible mass declared	13,669 lb · 6,200 kg	11,905 lb · 5,400 kg	+15% Agroplus 75
Wheelbase declared	93.7 in · 2,380 mm	92.2 in · 2,342 mm	—
Length declared	145.7 in · 3,700 mm	157.5 in · 4,000 mm	+8% 5635 (A)
Width declared	81.1 in · 2,060 mm	79.5–105.7 in · 2,020–2,685 mm	differs
Height, over the cab declared	103.3 in · 2,624 mm	100.4 in · 2,550 mm	—
Ground clearance declared	15.4–19.8 in · 392–502 mm	18.9 in · 480 mm	differs
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	147.9 qt · 140 L	121.5 qt · 115.0 L	+22% Agroplus 75

Source

Source