Deutz-Fahr Agroplus 75 or Massey Ferguson MF 3055 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3055 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson MF 3055 (A) suits loader and hydraulic implement work better on this data: 13% (455 kg / 1,003 lb) more three-point lift.
  • The Deutz-Fahr Agroplus 75 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agroplus 75 and Massey Ferguson MF 3055 (A), with the call on each
QuestionAgroplus 75MF 3055 (A)Call
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agroplus 75”55 kW (74 hp)Traktorenlexikon, “Massey Ferguson MF 3055”Not comparableNot comparable on power at the PTO shaft: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3055 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agroplus 75 and the MF 3055 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agroplus 75 and the MF 3055 (A).
Which pumps more oil for implements?50.0 L/min (13.2 gpm)Traktorenlexikon, “Massey Ferguson MF 3055”No figureNo call on hydraulic flow: no figure on record for the Agroplus 75.
Which lifts more on the three-point hitch?3,600 kg (7,937 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75”4,055 kg (8,940 lb)Traktorenlexikon, “Massey Ferguson MF 3055”AheadThe Massey Ferguson MF 3055 (A) has 13% more lift (455 kg / 1,003 lb) than the Deutz-Fahr Agroplus 75 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,430 kg (7,562 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75”3,900 kg (8,598 lb)Traktorenlexikon, “Massey Ferguson MF 3055”Ahead (a fact, not an advantage)The Massey Ferguson MF 3055 (A) is 14% heavier (470 kg / 1,036 lb) than the Deutz-Fahr Agroplus 75 (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Deutz-Fahr Agroplus 75”No figureNo call on maximum permissible mass: no figure on record for the MF 3055 (A).
Which has the wider choice of gears?30Traktorenlexikon, “Deutz-Fahr Agroplus 75”16Traktorenlexikon, “Massey Ferguson MF 3055”AheadThe Deutz-Fahr Agroplus 75 has 88% more forward gears (14 gears) than the Massey Ferguson MF 3055 (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agroplus 75 and the MF 3055 (A).
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agroplus 75”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 3055”AheadThe Deutz-Fahr Agroplus 75 has 33% more top speed (10.0 km/h / 6.2 mph) than the Massey Ferguson MF 3055 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agroplus 75”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3055”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 3055”No figureNo call on PTO independence: not stated for the Agroplus 75.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Deutz-Fahr Agroplus 75”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3055”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20051993–1995EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 3055 (A) has 13% more lift (455 kg / 1,003 lb) than the Deutz-Fahr Agroplus 75 (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 3055 (A) is 14% heavier (470 kg / 1,036 lb) than the Deutz-Fahr Agroplus 75 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agroplus 75 has 88% more forward gears (14 gears) than the Massey Ferguson MF 3055 (A) (both forward gears, as stated by the source).
  • The Deutz-Fahr Agroplus 75 has 33% more top speed (10.0 km/h / 6.2 mph) than the Massey Ferguson MF 3055 (A) (both top speed forward, as stated by the source).
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agroplus 75 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3055 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources