Deutz-Fahr Agroplus 75 vs Massey Ferguson MF 3055 (A)
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agroplus 75 and the MF 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Agroplus 75 | MF 3055 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74 hp | — |
| Engine declared | — | Perkins A 4.248 | — |
| Displacement declared | — | 4.07 L | — |
| Maximum torque declared | 218 lb·ft · 295 N·m | 209 lb·ft · 283 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% Agroplus 75 |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 13.2 gpm · 50.0 L/min | — |
| Three-point lift at ends declared | 7,937 lb · 3,600 kg | 8,940 lb · 4,055 kg | +13% MF 3055 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,562 lb · 3,430 kg | 8,598 lb · 3,900 kg | +14% MF 3055 (A) |
| Maximum permissible mass declared | 13,669 lb · 6,200 kg | — | — |
| Wheelbase declared | 93.7 in · 2,380 mm | 93.3 in · 2,371 mm | — |
| Length declared | 145.7 in · 3,700 mm | 160.2 in · 4,070 mm | +10% MF 3055 (A) |
| Width declared | 81.1 in · 2,060 mm | 80.7 in · 2,049 mm | — |
| Height declared | 103.3 in · 2,624 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 15.4–19.8 in · 392–502 mm | 14.6 in · 370 mm | differs |
| Fuel tank declared | 147.9 qt · 140 L | 156.4 qt · 148.0 L | +6% MF 3055 (A) |
Deutz-Fahr Agroplus 75 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 75”
Massey Ferguson MF 3055 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 3055”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”