Deutz-Fahr Agroplus 100 vs VALMET 6550 HiTech

9 material differences · fewer than 12

Tractor one

1997–2005

No measured PTO figure

Tractor two

1998–2006

No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 100 and the 6550 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 100 and VALMET 6550 HiTech, field by field
Field	Agroplus 100	6550 HiTech	Gap
Engine
Engine power, claimed claimed	97.8 hp	98.6 hp	—
Engine declared	—	VALMET 420 DWRE or 44 ET	—
Displacement declared	—	4.40 L	—
Maximum torque declared	282 lb·ft · 383 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Electrically-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	18.7 gpm · 70.8 L/min	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	12,346 lb · 5,600 kg	+16% Agroplus 100
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,855 lb · 4,470 kg	10,406 lb · 4,720 kg	+6% 6550 HiTech
Maximum permissible mass declared	15,873 lb · 7,200 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	101.1 in · 2,568 mm	92.1 in · 2,340 mm	+10% Agroplus 100
Length declared	155.2 in · 3,943 mm	178.0 in · 4,520 mm	+15% 6550 HiTech
Width declared	81.1 in · 2,060 mm	92.9 in · 2,360 mm	+15% 6550 HiTech
Height declared	103.3 in · 2,624 mm	107.1 in · 2,720 mm	—
Ground clearance declared	19.1 in · 484 mm	17.1 in · 434 mm	+12% Agroplus 100
Fuel tank declared	147.9 qt · 140 L	174.4 qt · 165.0 L	+18% 6550 HiTech

Source

Source