10 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrolux 802000–2005No measured PTO figureTractor twoDeutz-Fahr DX 3.75 A1993–1996No measured PTO figure

Which should you choose?

Read our verdict on the Agrolux 80 and the DX 3.75 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrolux 80 and Deutz-Fahr DX 3.75 A, field by field
FieldAgrolux 80DX 3.75 AGap
Engine
Engine power, claimed claimed76.0 hp76.6 hp—
Engine declaredKHD F4L 913KHD F4L 913—
Displacement declared4.09 L4.09 L—
Maximum torque declared199 lb·ft · 270 N·m183 lb·ft · 248 N·m+9% Agrolux 80
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h—
Clutch declaredMechanically operated, dry Borg & Beck single clutch, type: 330Independent dry double clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centreOpen centre—
Pump flow declared9.5 gpm · 36.0 L/min10.6 gpm · 40.0 L/min+11% DX 3.75 A
Pressure declared2,176 psi · 150 bar3,481 psi · 240 bar+60% DX 3.75 A
Three-point lift, at the coupling points declared6,799 lb · 3,084 kg7,275 lb · 3,300 kg+7% DX 3.75 A
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,195 lb · 2,810 kg7,077 lb · 3,210 kg+14% DX 3.75 A
Maximum permissible mass declared11,023 lb · 5,000 kg11,023 lb · 5,000 kg—
Wheelbase declared92.5 in · 2,350 mm88.6 in · 2,250 mm—
Length declared151.4 in · 3,845 mm141.7 in · 3,600 mm+7% Agrolux 80
Width declared81.1 in · 2,060 mm84.2 in · 2,138 mm—
Ground clearance declared17.7 in · 450 mm16.1 in · 408 mm+10% Agrolux 80
Turning radius, braked declared—12.8 ft · 3.90 m—
Fuel tank declared79.3 qt · 75 L91.9 qt · 87 L+16% DX 3.75 A

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr Agrolux 80 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agrolux 80”
  • Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”

Deutz-Fahr DX 3.75 A sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr DX 3.75 A”
  • Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”