Deutz-Fahr Agrocompact 90 V/F or Hürlimann XN-709?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrocompact 90 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the XN-709 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrocompact 90 V/F | XN-709 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 64.8 kW (86.9 hp)Traktorenlexikon, “Deutz-Fahr Agrocompact 90” | 64.8 kW (86.9 hp)Traktorenlexikon, “Hürlimann XN 709” | Not comparableNot comparable on power at the PTO shaft: the Agrocompact 90 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the XN-709 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrocompact 90 V/F and the XN-709. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrocompact 90 V/F and the XN-709. |
| Which pumps more oil for implements? | — | 34.9 L/min (9.2 gpm)Traktorenlexikon, “Hürlimann XN 709” | No figureNo call on hydraulic flow: no figure on record for the Agrocompact 90 V/F. |
| Which lifts more on the three-point hitch? | 2,600 kg (5,732 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 90” | 1,780 kg (3,924 lb)Traktorenlexikon, “Hürlimann XN 709” | Not comparableNot comparable on three-point lift: the Agrocompact 90 V/F: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrocompact 90”); the XN-709: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XN 709”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,700 kg (5,952 lb) to 2,750 kg (6,063 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 90” | 2,740 kg (6,041 lb)Traktorenlexikon, “Hürlimann XN 709” | EvenEven on weight (both unladen weight, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which may carry more ballast and load? | 4,300 kg (9,480 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 90” | — | No figureNo call on maximum permissible mass: no figure on record for the XN-709. |
| Which has the wider choice of gears? | 20Traktorenlexikon, “Deutz-Fahr Agrocompact 90” | 45Traktorenlexikon, “Hürlimann XN 709” | AheadThe Hürlimann XN-709 has 125% more forward gears (25 gears) than the Deutz-Fahr Agrocompact 90 V/F (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrocompact 90 V/F and the XN-709. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrocompact 90” | 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XN 709” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrocompact 90” | 540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann XN 709” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the Agrocompact 90 V/F and the XN-709. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrocompact 90” | 4WDTraktorenlexikon, “Hürlimann XN 709”; OECD test report 1828, 1999 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2004 | 1999–2003 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hürlimann XN-709 has 125% more forward gears (25 gears) than the Deutz-Fahr Agrocompact 90 V/F (both forward gears, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agrocompact 90 V/F has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the XN-709 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Agrocompact 90 V/F: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrocompact 90”); the XN-709: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XN 709”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources