10 material differences · fewer than 12
Tractor oneDeutz (KHD) F4L 514/41951–1966No measured PTO figureTractor twoHürlimann D 200 S1966–1971No measured PTO figure
Which should you choose?
Read our verdict on the F4L 514/4 and the D 200 S → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | F4L 514/4 | D 200 S | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58.9 hp | 64.1 hp | +9% D 200 S |
| Engine declared | KHD F4L 514 | Hürlimann D-120 | differs |
| Displacement declared | 5.32 L | 4.43 L | +20% F4L 514/4 |
| Maximum torque declared | 204 lb·ft · 277 N·m | — | — |
| Transmission | |||
| Top speed declared | 17.3 mph · 27.8 km/h | 12.4 mph · 20 km/h | +39% F4L 514/4 |
| Clutch declared | Pedal operated dry single-plate clutch by Fichtel & Sachs | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.5 gpm · 32.0 L/min | — |
| Pressure declared | — | 2,418 psi · 167 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,724 lb · 3,050 kg | 5,776 lb · 2,620 kg | +16% F4L 514/4 |
| Maximum permissible mass declared | 12,125 lb · 5,500 kg | — | — |
| Wheelbase declared | 96.1 in · 2,440 mm | 80.7 in · 2,050 mm | +19% F4L 514/4 |
| Length declared | 153.5 in · 3,900 mm | 131.9 in · 3,350 mm | +16% F4L 514/4 |
| Width declared | 75.1 in · 1,907 mm | 67.7 in · 1,720 mm | +11% F4L 514/4 |
| Ground clearance declared | 18.5 in · 470 mm | 16.1 in · 410 mm | +15% F4L 514/4 |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 10.5 ft · 3.20 m | +25% F4L 514/4 |
| Fuel tank declared | — | 42.3 qt · 40.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F4L 514/4 sources
- Source: Traktorenlexikon, “Deutz F4L 514/4”
- Source: Traktorenlexikon, “Fahr D 55 L”
Hürlimann D 200 S sources
- Source: Traktorenlexikon, “Hürlimann D 200 S”