10 material differences · fewer than 12
Tractor oneDeutz (KHD) F2L 514/541954–1955No measured PTO figureTractor twoInternational Harvester D-4301956–1962No measured PTO figure
Which should you choose?
Read our verdict on the F2L 514/54 and the D-430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | F2L 514/54 | D-430 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 30 hp | 29.6 hp | — |
| Engine declared | KHD F2L 514 | INTERNATIONAL-HARVESTER DD-132 | differs |
| Displacement declared | 2.66 L | 2.18 L | +22% F2L 514/54 |
| Maximum torque declared | 105 lb·ft · 142 N·m | 90 lb·ft · 122 N·m | +16% F2L 514/54 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | — | Foot-operated dry single-plate clutch from Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.1 gpm · 15.5 L/min | — |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 585 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,244–4,354 lb · 1,925–1,975 kg | 3,660 lb · 1,660 kg | differs |
| Maximum permissible mass declared | 5,732 lb · 2,600 kg | 4,409 lb · 2,000 kg | +30% F2L 514/54 |
| Wheelbase declared | 78.9 in · 2,005 mm | 74.0 in · 1,880 mm | +7% F2L 514/54 |
| Length declared | 124.6 in · 3,165 mm | 115.4 in · 2,930 mm | +8% F2L 514/54 |
| Width declared | 61.0 in · 1,550 mm | 64.6 in · 1,640 mm | +6% D-430 |
| Ground clearance declared | 15.0 in · 380 mm | 15.2 in · 385 mm | — |
| Turning radius, braked declared | 10.5 ft · 3.20 m | 9.2 ft · 2.80 m | +14% F2L 514/54 |
| Fuel tank declared | — | 31.7–58.1 qt · 30.0–55.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F2L 514/54 sources
- Source: Traktorenlexikon, “Deutz F2L 514/54”
- Source: Traktorenlexikon, “Fahr D 270”
International Harvester D-430 sources
- Source: Traktorenlexikon, “McCormick D-430 Farmall”
- Source: Traktorenlexikon, “McCormick DGD 4”