9 material differences · fewer than 12
Tractor oneDeutz (KHD) F2L 514/41956–1960No measured PTO figureTractor twoZickler 37541966–1967No measured PTO figure
Which should you choose?
Read our verdict on the F2L 514/4 and the 3754 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | F2L 514/4 | 3754 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 30 hp | 30 hp | — |
| Engine declared | KHD F2L 514 | — | — |
| Displacement declared | 2.66 L | — | — |
| Maximum torque declared | 105 lb·ft · 142 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.7 mph · 18.79 km/h | +6% F2L 514/4 |
| Clutch declared | Pedal-operated dry single-plate clutch by Fichtel & Sachs | Single-plate dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.8 gpm · 18.0 L/min | — | — |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 588 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,244 lb · 1,925 kg | 2,315 lb · 1,050 kg | +83% F2L 514/4 |
| Maximum permissible mass declared | 6,614 lb · 3,000 kg | 3,726 lb · 1,690 kg | +78% F2L 514/4 |
| Wheelbase declared | 78.9 in · 2,005 mm | 54.3 in · 1,380 mm | +45% F2L 514/4 |
| Length declared | 124.6 in · 3,165 mm | — | — |
| Width declared | 61.0 in · 1,550 mm | 36.2 in · 920 mm | +68% F2L 514/4 |
| Ground clearance declared | 15.6 in · 395 mm | 9.1 in · 230 mm | +72% F2L 514/4 |
| Turning radius, braked declared | 10.5 ft · 3.20 m | 6.4 ft · 1.95 m | +64% F2L 514/4 |
| Fuel tank declared | 39.1 qt · 37 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F2L 514/4 sources
- Source: Traktorenlexikon, “Deutz F2L 514/4”
- Source: Traktorenlexikon, “Fahr D 270”
Zickler 3754 sources
- Source: Traktorenlexikon, “Zickler 3754”