8 material differences · fewer than 12
Tractor oneDeutz (KHD) F1L514/2-N1956–1957No measured PTO figureTractor twoInternational Harvester CUB-154 LO-BOY1968–1974No measured PTO figure
Which should you choose?
Read our verdict on the F1L514/2-N and the CUB-154 LO-BOY → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | F1L514/2-N | CUB-154 LO-BOY | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15 hp | 15 hp | — |
| Engine declared | Deutz F1L 514 | INTERNATIONAL HARVESTER C-60 | differs |
| Displacement declared | 1.33 L | 0.98 L | +36% F1L514/2-N |
| Maximum torque declared | 51 lb·ft · 69 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 7.5 mph · 12 km/h | +67% F1L514/2-N |
| Clutch declared | — | Pedal operated dry ROCKFORD single disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 2.0 gpm · 7.6 L/min | — |
| Rear PTO speeds declared | 1220 | 1800 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,965 lb · 1,345 kg | 1,479 lb · 671 kg | +100% F1L514/2-N |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | — | — |
| Wheelbase declared | 62.4–65.7 in · 1,585–1,670 mm | 64.0 in · 1,626 mm | — |
| Length declared | 98.8 in · 2,510 mm | 94.0 in · 2,388 mm | — |
| Width declared | 63.0 in · 1,600 mm | 52.0 in · 1,321 mm | +21% F1L514/2-N |
| Ground clearance declared | 15.7 in · 400 mm | 13.0 in · 330 mm | +21% F1L514/2-N |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 8.0 ft · 2.44 m | +15% F1L514/2-N |
| Fuel tank declared | — | 30.0 qt · 28.4 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) F1L514/2-N sources
- Source: Traktorenlexikon, “Deutz F1L 514/2-N”
- Source: Traktorenlexikon, “Deutz F1L 514/50”
International Harvester CUB-154 LO-BOY sources
- Source: Traktorenlexikon, “IHC Cub 154 Lo-Boy”
- Source: Traktorenlexikon, “McCormick Farmall Cub”