Deutz (KHD) D 9006 vs Ford 7700 (A)
5 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1968–1970; 1976–1981). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | D 9006 | 7700 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.3 hp | 90.8 hp | — |
| Engine declared | KHD F6L 912 | Ford 256 DF or 268 DF | differs |
| Displacement declared | 5.65 L | — | — |
| Maximum torque declared | 236 lb·ft · 320 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry Walterscheid double clutch operated by two-stage pedal | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 34.7 L/min | 10.8 gpm · 41.0 L/min | +18% 7700 (A) |
| Three-point lift at ends declared | — | 5,886 lb · 2,670 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,058 lb · 3,655 kg | 8,305 lb · 3,767 kg | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 101.6 in · 2,581 mm | — |
| Length declared | 165.7 in · 4,210 mm | 160.2 in · 4,069 mm | — |
| Width declared | 81.7 in · 2,075 mm | 64.0 in · 1,626 mm | +28% D 9006 |
| Height declared | 94.5 in · 2,400 mm | 114.4 in · 2,907 mm | +21% 7700 (A) |
| Ground clearance declared | 22.2 in · 565 mm | 21.7 in · 551 mm | — |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 188.1 qt · 178.0 L | +48% 7700 (A) |
Deutz (KHD) D 9006 sources
Source
- Source: Traktorenlexikon, “Deutz D 9006”
- Source: Traktorenlexikon, “Deutz-Fahr DX 110”
Ford 7700 (A) sources
Source
- Source: Traktorenlexikon, “Ford 7700”
- Source: Traktorenlexikon, “Ford 6700”