8 material differences · fewer than 12
Tractor oneDeutz (KHD) D 90051967No measured PTO figureTractor twoJ.I. Case 9401962–1969No measured PTO figure
Which should you choose?
Read our verdict on the D 9005 and the 940 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 9005 | 940 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.4 hp | 83.0 hp | — |
| Engine declared | KHD F6L 812 D | — | — |
| Displacement declared | 5.10 L | — | — |
| Maximum torque declared | 210 lb·ft · 284 N·m | — | — |
| Transmission | |||
| Top speed declared | 16.8 mph · 27 km/h | 15.5 mph · 25 km/h | +8% D 9005 |
| Clutch declared | dry double clutch operated by two-stage pedal | pedal-operated dry CASE single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.0 gpm · 34.0 L/min | 15.5 gpm · 58.7 L/min | +73% 940 |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,102 lb · 3,675 kg | 8,852 lb · 4,015 kg | +9% 940 |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 83.8 in · 2,129 mm | +20% D 9005 |
| Length declared | 164.0 in · 4,165 mm | 141.0 in · 3,581 mm | +16% D 9005 |
| Width declared | 85.0 in · 2,160 mm | 84.0 in · 2,134 mm | — |
| Ground clearance declared | 22.2 in · 565 mm | 17.5 in · 445 mm | +27% D 9005 |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 9.5 ft · 2.90 m | +38% D 9005 |
| Fuel tank declared | — | 95.9–120.0 qt · 90.8–113.6 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 9005 sources
Source
- Source: Traktorenlexikon, “Deutz D 9005”
J.I. Case 940 sources
Source
- Source: Traktorenlexikon, “Case 940”