6 material differences · fewer than 12
Tractor oneDeutz (KHD) D 90051967No measured PTO figureTractor twoFendt Favorit 610 S1972–1976No measured PTO figure
Which should you choose?
Read our verdict on the D 9005 and the Favorit 610 S → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | D 9005 | Favorit 610 S | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.4 hp | 83.4 hp | — |
| Engine declared | KHD F6L 812 D | MWM D 225-6 | differs |
| Displacement declared | 5.10 L | 5.10 L | — |
| Maximum torque declared | 210 lb·ft · 284 N·m | — | — |
| Transmission | |||
| Top speed declared | 16.8 mph · 27 km/h | 18.6 mph · 30 km/h | +11% Favorit 610 S |
| Clutch declared | dry double clutch operated by two-stage pedal | Single-disc dry clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 9.0 gpm · 34.0 L/min | 9.7 gpm · 36.8 L/min | +8% Favorit 610 S |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,102 lb · 3,675 kg | 8,499 lb · 3,855 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 106.1 in · 2,696 mm | +6% Favorit 610 S |
| Length declared | 164.0 in · 4,165 mm | 172.5 in · 4,382 mm | — |
| Width declared | 85.0 in · 2,160 mm | 84.8 in · 2,154 mm | — |
| Ground clearance declared | 22.2 in · 565 mm | 18.1 in · 460 mm | +23% D 9005 |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 13.8 ft · 4.21 m | — |
| Fuel tank declared | — | 137.4 qt · 130 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 9005 sources
- Source: Traktorenlexikon, “Deutz D 9005”
Fendt Favorit 610 S sources
- Source: Traktorenlexikon, “Fendt Favorit 610 S”
- Source: Traktorenlexikon, “Fendt Favorit 4 S/SA”