9 material differences · fewer than 12
Tractor oneDeutz (KHD) D 72061974–1981No measured PTO figureTractor twoHürlimann H-480 (A)1979–1982No measured PTO figure
Which should you choose?
Read our verdict on the D 7206 and the H-480 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 7206 | H-480 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.7 hp | 80.9 hp | +14% H-480 (A) |
| Engine declared | KHD F4L 912 | Hürlimann H-1104/7 | differs |
| Displacement declared | 3.77 L | 4.56 L | +21% H-480 (A) |
| Maximum torque declared | 178 lb·ft · 242 N·m | 232 lb·ft · 315 N·m | +30% H-480 (A) |
| Transmission | |||
| Top speed declared | 17.1 mph · 27.6 km/h | 15.5 mph · 25 km/h | +10% D 7206 |
| Clutch declared | Independent dry double clutch from Fichtel & Sachs | Dry SAME double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.2 gpm · 27.2 L/min | 9.2 gpm · 34.8 L/min | +28% H-480 (A) |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,732 lb · 2,600 kg | 6,722 lb · 3,049 kg | +17% H-480 (A) |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 94.9 in · 2,410 mm | 92.1 in · 2,340 mm | — |
| Length declared | 155.9 in · 3,960 mm | 156.7 in · 3,980 mm | — |
| Width declared | 76.4 in · 1,940 mm | 76.8–104.3 in · 1,950–2,650 mm | differs |
| Ground clearance declared | 19.9 in · 505 mm | 15.7 in · 400 mm | +26% D 7206 |
| Turning radius, braked declared | 13.0 ft · 3.96 m | — | — |
| Fuel tank declared | 99.3 qt · 94 L | 100.4 qt · 95.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 7206 sources
- Source: Traktorenlexikon, “Deutz D 7206”
- Source: Traktorenlexikon, “Deutz D 6006”
Hürlimann H-480 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 480”