Deutz (KHD) D 6206 vs International Harvester 624 (A)

10 material differences · fewer than 12

Tractor one

1974–1980

No measured PTO figure

Tractor two

1965–1972

No measured PTO figure

Which should you choose?

Read our verdict on the D 6206 and the 624 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz (KHD) D 6206 and International Harvester 624 (A), field by field
Field	D 6206	624 (A)	Gap
Engine
Engine power, claimed claimed	—	57.3 hp	—
Engine declared	KHD F4L 912	INTERNATIONAL-HARVESTER D-206	differs
Displacement declared	3.77 L	3.38 L	+11% D 6206
Maximum torque declared	159 lb·ft · 216 N·m	151 lb·ft · 205 N·m	+5% D 6206
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	Independent two-plate dry clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	7.2 gpm · 27.4 L/min	7.5 gpm · 28.3 L/min	—
Pressure declared	2,901 psi · 200 bar	3,553 psi · 245 bar	+23% 624 (A)
Three-point lift at ends declared	—	3,748 lb · 1,700 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,905 lb · 2,225 kg	5,575 lb · 2,529 kg	+14% 624 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	83.5 in · 2,120 mm	—
Length declared	144.9 in · 3,680 mm	139.0 in · 3,530 mm	—
Width declared	72.2 in · 1,835 mm	71.5 in · 1,815 mm	—
Height declared	66.5 in · 1,690 mm	95.2 in · 2,419 mm	+43% 624 (A)
Ground clearance declared	18.1 in · 460 mm	16.5 in · 419 mm	+10% D 6206
Turning radius, braked declared	11.8 ft · 3.61 m	12.0 ft · 3.65 m	—
Fuel tank declared	63.4 qt · 60 L	74.0 qt · 70.0 L	+17% 624 (A)

Source

Source