Deutz (KHD) D 6206 vs Fiat 650-S (DT)

9 material differences · fewer than 12

Tractor one

1974–1980

No measured PTO figure

Tractor two

1971–1974

No measured PTO figure

Which should you choose?

Read our verdict on the D 6206 and the 650-S (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz (KHD) D 6206 and Fiat 650-S (DT), field by field
Field	D 6206	650-S (DT)	Gap
Engine
Engine power, claimed claimed	—	69.1 hp	—
Engine declared	KHD F4L 912	O.M.-FIAT CN 3	differs
Displacement declared	3.77 L	3.71 L	—
Maximum torque declared	159 lb·ft · 216 N·m	203 lb·ft · 275 N·m	+27% 650-S (DT)
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	14.9 mph · 24 km/h	differs
Clutch declared	Independent two-plate dry clutch	Dry FEREDO double clutch	differs
Hydraulics & hitch
Pump flow declared	7.2 gpm · 27.4 L/min	7.6 gpm · 28.8 L/min	—
Pressure declared	2,901 psi · 200 bar	2,843 psi · 196 bar	—
Three-point lift at ends declared	—	4,960 lb · 2,250 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,905 lb · 2,225 kg	6,338 lb · 2,875 kg	+29% 650-S (DT)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	91.3 in · 2,320 mm	+9% 650-S (DT)
Length declared	144.9 in · 3,680 mm	148.4 in · 3,770 mm	—
Width declared	72.2 in · 1,835 mm	69.3 in · 1,760 mm	—
Height declared	66.5 in · 1,690 mm	68.5 in · 1,740 mm	—
Ground clearance declared	18.1 in · 460 mm	20.1 in · 510 mm	+11% 650-S (DT)
Turning radius, braked declared	11.8 ft · 3.61 m	12.0 ft · 3.65 m	—
Fuel tank declared	63.4 qt · 60 L	82.4 qt · 78.0 L	+30% 650-S (DT)

Source

Source