Deutz (KHD) D 5006 V/VA vs Güldner G 45 (S)

11 material differences · fewer than 12

Tractor one

from 1974

No measured PTO figure

Tractor two

1965–1969

No measured PTO figure

Which should you choose?

Read our verdict on the D 5006 V/VA and the G 45 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz (KHD) D 5006 V/VA and Güldner G 45 (S), field by field
Field	D 5006 V/VA	G 45 (S)	Gap
Engine
Engine power, claimed claimed	44.1 hp	44.1 hp	—
Engine declared	KHD F3L 912	Güldner 4 L 79	differs
Displacement declared	2.83 L	3.14 L	+11% G 45 (S)
Maximum torque declared	114 lb·ft · 155 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25.0 km/h	12.4–18.6 mph · 20–30 km/h	differs
Clutch declared	—	Pedal operated dry double clutch	—
Hydraulics & hitch
Pressure declared	—	2,134 psi · 147 bar	—
Three-point lift at ends declared	3,483 lb · 1,580 kg	4,211 lb · 1,910 kg	+21% G 45 (S)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	3,395 lb · 1,540 kg	4,619 lb · 2,095 kg	+36% G 45 (S)
Maximum permissible mass declared	—	7,496 lb · 3,400 kg	—
Wheelbase declared	74.4 in · 1,890 mm	82.4 in · 2,092 mm	+11% G 45 (S)
Length declared	125.2 in · 3,180 mm	137.0 in · 3,480 mm	+9% G 45 (S)
Width declared	37.4 in · 950 mm	64.5 in · 1,638 mm	+72% G 45 (S)
Height declared	49.8 in · 1,265 mm	59.5 in · 1,512 mm	+20% G 45 (S)
Ground clearance declared	11.8 in · 300 mm	15.2 in · 387 mm	+29% G 45 (S)
Turning radius, braked declared	8.7 ft · 2.65 m	11.0 ft · 3.35 m	+26% G 45 (S)
Fuel tank declared	—	52.8 qt · 50 L	—

Source

Source