13 material differences
Tractor oneDeutz (KHD) D 501960–1962No measured PTO figureTractor twoNuffield 10/601964–1967No measured PTO figure
Which should you choose?
Read our verdict on the D 50 and the 10/60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | D 50 | 10/60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45.2 hp | 57.5 hp | +27% 10/60 |
| Engine declared | KHD F4L 712 | BMC 38 T | differs |
| Displacement declared | 3.40 L | 3.77 L | +11% 10/60 |
| Maximum torque declared | 127 lb·ft · 172 N·m | 170 lb·ft · 230 N·m | +34% 10/60 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% 10/60 |
| Clutch declared | Dry double clutch operated by two-stage pedal | Pedal-operated dry Borg & Beck single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.2 gpm · 35.0 L/min | — |
| Pressure declared | 2,134 psi · 147 bar | — | — |
| Rear PTO speeds declared | 590 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,707 lb · 2,135 kg | 5,864 lb · 2,660 kg | +25% 10/60 |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | — | — |
| Wheelbase declared | 87.8 in · 2,230 mm | 78.0 in · 1,981 mm | +13% D 50 |
| Length declared | 142.9 in · 3,630 mm | 121.5 in · 3,086 mm | +18% D 50 |
| Width declared | 73.4 in · 1,865 mm | 69.0 in · 1,753 mm | +6% D 50 |
| Ground clearance declared | 20.3 in · 515 mm | 12.6 in · 320 mm | +61% D 50 |
| Turning radius, braked declared | 11.3 ft · 3.45 m | 10.4 ft · 3.18 m | +8% D 50 |
| Fuel tank declared | 57.1 qt · 54 L | 67.2 qt · 63.6 L | +18% 10/60 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 50 sources
Source
- Source: Traktorenlexikon, “Deutz D 50”
Nuffield 10/60 sources
Source
- Source: Traktorenlexikon, “Nuffield 10/60 (1964-1967)”