7 material differences · fewer than 12
Tractor oneDeutz (KHD) D 45061972–1980No measured PTO figureTractor twoFendt 240 S1987–1993No measured PTO figure
Which should you choose?
Read our verdict on the D 4506 and the 240 S → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D 4506 | 240 S | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.3 hp | 39.3 hp | — |
| Engine declared | KHD F3L 912 | KHD F3L 912 | — |
| Displacement declared | 2.83 L | 2.83 L | — |
| Maximum torque declared | 95 lb·ft · 129 N·m | 121 lb·ft · 164 N·m | +27% 240 S |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 24.9 mph · 40 km/h | +100% 240 S |
| Clutch declared | Pedal operated dry double clutch with independent PTO clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.2 gpm · 27.2 L/min | — | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/750 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,233 lb · 1,920 kg | 5,038 lb · 2,285 kg | +19% 240 S |
| Maximum permissible mass declared | 7,716 lb · 3,500 kg | 8,818 lb · 4,000 kg | +14% 240 S |
| Wheelbase declared | 78.7 in · 2,000 mm | 80.7 in · 2,050 mm | — |
| Length declared | 136.6 in · 3,470 mm | 139.2 in · 3,535 mm | — |
| Width declared | 66.9 in · 1,700 mm | 65.9 in · 1,675 mm | — |
| Ground clearance declared | 16.9 in · 430 mm | 13.9 in · 353 mm | +22% D 4506 |
| Turning radius, braked declared | 10.5 ft · 3.19 m | — | — |
| Fuel tank declared | 74.0 qt · 70 L | 63.4 qt · 60 L | +17% D 4506 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 4506 sources
- Source: Traktorenlexikon, “Deutz D 4506”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Fendt 240 S sources
- Source: Traktorenlexikon, “Fendt Farmer 240 S”
- Source: Traktorenlexikon, “Deutz D 4006 P”