6 material differences · fewer than 12
Tractor oneDeutz (KHD) D 45051965–1967No measured PTO figureTractor twoDeutz (KHD) D 45061972–1980No measured PTO figure
Which should you choose?
Read our verdict on the D 4505 and the D 4506 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | D 4505 | D 4506 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.3 hp | 39.3 hp | — |
| Engine declared | KHD F3L 812 | KHD F3L 912 | differs |
| Displacement declared | 2.55 L | 2.83 L | +11% D 4506 |
| Maximum torque declared | 95 lb·ft · 129 N·m | 95 lb·ft · 129 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 12.4 mph · 20 km/h | differs |
| Clutch declared | — | Pedal operated dry double clutch with independent PTO clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.2 gpm · 27.2 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,233 lb · 1,920 kg | 4,233 lb · 1,920 kg | — |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | 7,716 lb · 3,500 kg | +9% D 4506 |
| Wheelbase declared | 78.5 in · 1,995 mm | 78.7 in · 2,000 mm | — |
| Length declared | 134.4 in · 3,415 mm | 136.6 in · 3,470 mm | — |
| Width declared | 63.4 in · 1,610 mm | 66.9 in · 1,700 mm | +6% D 4506 |
| Ground clearance declared | 16.3 in · 415 mm | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 10.5 ft · 3.19 m | — |
| Fuel tank declared | 67.6 qt · 64 L | 74.0 qt · 70 L | +9% D 4506 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 4505 sources
- Source: Traktorenlexikon, “Deutz D 4505”
Deutz (KHD) D 4506 sources
- Source: Traktorenlexikon, “Deutz D 4506”
- Source: Traktorenlexikon, “Deutz D 4006 P”