Deutz (KHD) D 4005 or IMT 540?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the IMT 540 is ahead on top speed.

  • The IMT 540 suits road haulage better on this data: 20% (4.0 km/h / 2.5 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz (KHD) D 4005 and IMT 540, with the call on each
QuestionD 4005540Call
Which puts more power through the PTO shaft?24.5 kW (32.8 hp)Traktorenlexikon, “Deutz D 4005”24.7 kW (33.1 hp)Traktorenlexikon, “IMT 540”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the D 4005 and the 540.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the D 4005 and the 540.
Which pumps more oil for implements?—14.3 L/min (3.8 gpm)Traktorenlexikon, “IMT 540”No figureNo call on hydraulic flow: no figure on record for the D 4005.
Which lifts more on the three-point hitch?1,625 kg (3,583 lb)Traktorenlexikon, “Deutz D 4005”1,405 kg (3,097 lb)Traktorenlexikon, “IMT 540”Not comparableNot comparable on three-point lift: the D 4005: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz D 4005”); the 540: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IMT 540”) — not the same quantity, basis and condition.
Which is heavier, for traction?1,780 kg (3,924 lb)Traktorenlexikon, “Deutz D 4005”1,790 kg (3,946 lb)Traktorenlexikon, “IMT 540”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?3,200 kg (7,055 lb)Traktorenlexikon, “Deutz D 4005”—No figureNo call on maximum permissible mass: no figure on record for the 540.
Which has the wider choice of gears?8Traktorenlexikon, “Deutz D 4005”6 to 10Traktorenlexikon, “IMT 540”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Deutz D 4005”—No figureNo call on a creeper range: not stated for the 540.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Deutz D 4005”24 km/h (14.9 mph)Traktorenlexikon, “IMT 540”AheadThe IMT 540 has 20% more top speed (4.0 km/h / 2.5 mph) than the Deutz D 4005 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Deutz D 4005”540 rpmTraktorenlexikon, “IMT 540”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz D 4005”independentTraktorenlexikon, “IMT 540”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Deutz D 4005”2WDTraktorenlexikon, “IMT 540”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1965–19671975–1986Ahead (a fact, not an advantage)The IMT 540 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The IMT 540 has 20% more top speed (4.0 km/h / 2.5 mph) than the Deutz D 4005 (both top speed forward, as stated by the source).
  • The IMT 540 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Not comparable on three-point lift: the D 4005: lift at an unstated point, as stated by the source (Traktorenlexikon, “Deutz D 4005”); the 540: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IMT 540”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources