Deutz (KHD) D 3005 vs Ford 1900 (A)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 3005 and the 1900 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 3005 | 1900 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.5 hp | 28.3 hp | — |
| Engine declared | — | ISHIKAWAJIMA-SHIBAURA LEM-853 | — |
| Displacement declared | — | 1.43 L | — |
| Maximum torque declared | 67 lb·ft · 91 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4–16.1 mph · 20.0–25.9 km/h | 13.7 mph · 22 km/h | differs |
| Clutch declared | — | Pedal-operated dry DAIKIN dual clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.8 gpm · 29.5 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Three-point lift at ends declared | — | 3,810 lb · 1,728 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,605 lb · 1,635 kg | 2,690 lb · 1,220 kg | +34% D 3005 |
| Maximum permissible mass declared | 6,614 lb · 3,000 kg | — | — |
| Wheelbase declared | 73.4 in · 1,865 mm | 63.0 in · 1,600 mm | +17% D 3005 |
| Length declared | 127.8 in · 3,245 mm | 118.5 in · 3,010 mm | +8% D 3005 |
| Width declared | 60.4 in · 1,535 mm | 57.5 in · 1,460 mm | — |
| Height declared | 61.4 in · 1,560 mm | 86.2 in · 2,190 mm | +40% 1900 (A) |
| Ground clearance declared | 15.9 in · 405 mm | 15.0 in · 380 mm | +7% D 3005 |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 7.9 ft · 2.40 m | +35% D 3005 |
| Fuel tank declared | 67.6 qt · 64 L | 30.7 qt · 29.1 L | +120% D 3005 |
Deutz (KHD) D 3005 sources
Source
- Source: Traktorenlexikon, “Deutz D 3005”
Ford 1900 (A) sources
Source
- Source: Traktorenlexikon, “Ford 1900”