8 material differences · fewer than 12
Tractor oneDeutz (KHD) D 12006 A1971No measured PTO figureTractor twoSteyr 8140 (a)1977–1982No measured PTO figure
Which should you choose?
Read our verdict on the D 12006 A and the 8140 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D 12006 A | 8140 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | KHD BF6L 912 | Steyr WD-612.40 | differs |
| Displacement declared | 5.65 L | 6.59 L | +17% 8140 (a) |
| Maximum torque declared | 304 lb·ft · 412 N·m | 333 lb·ft · 451 N·m | +9% 8140 (a) |
| Transmission | |||
| Top speed declared | 18.0 mph · 29 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry Fichtel and Sachs single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.8 gpm · 40.9 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | 3,553 psi · 245 bar | +40% 8140 (a) |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,274 lb · 4,660 kg | 10,251 lb · 4,650 kg | — |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 101.6 in · 2,580 mm | 105.6 in · 2,682 mm | — |
| Length declared | 166.1 in · 4,220 mm | 176.0 in · 4,470 mm | +6% 8140 (a) |
| Width declared | 88.6 in · 2,250 mm | 89.3 in · 2,267 mm | — |
| Ground clearance declared | 16.7 in · 425 mm | 19.7 in · 500 mm | +18% 8140 (a) |
| Turning radius, braked declared | 16.4 ft · 5.00 m | 16.7 ft · 5.10 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 208.2 qt · 197.0 L | +64% 8140 (a) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 12006 A sources
- Source: Traktorenlexikon, “Deutz D 12006”
- Source: Traktorenlexikon, “Deutz D 13006”
Steyr 8140 (a) sources
- Source: Traktorenlexikon, “Steyr 8140”