9 material differences · fewer than 12
Tractor oneDeutz (KHD) D 12006 A1971No measured PTO figureTractor twoJ.I. Case 20901978–1983No measured PTO figure
Which should you choose?
Read our verdict on the D 12006 A and the 2090 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 12006 A | 2090 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | KHD BF6L 912 | CASE 504 BD | differs |
| Displacement declared | 5.65 L | 8.26 L | +46% 2090 |
| Maximum torque declared | 304 lb·ft · 412 N·m | 318 lb·ft · 431 N·m | — |
| Transmission | |||
| Top speed declared | 18.0 mph · 29 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Pedal-operated wet disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 21.0 gpm · 79.5 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,274 lb · 4,660 kg | 11,909–12,031 lb · 5,402–5,457 kg | differs |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 101.6 in · 2,580 mm | 104.0 in · 2,642 mm | — |
| Length declared | 166.1 in · 4,220 mm | 161.8 in · 4,110 mm | — |
| Width declared | 88.6 in · 2,250 mm | 79.1–103.1 in · 2,010–2,620 mm | differs |
| Ground clearance declared | 16.7 in · 425 mm | 21.0 in · 533 mm | +25% 2090 |
| Turning radius, braked declared | 16.4 ft · 5.00 m | 11.8 ft · 3.61 m | +39% D 12006 A |
| Fuel tank declared | 126.8 qt · 120 L | 259.9 qt · 246.0 L | +105% 2090 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 12006 A sources
- Source: Traktorenlexikon, “Deutz D 12006”
- Source: Traktorenlexikon, “Deutz D 13006”
J.I. Case 2090 sources
- Source: Traktorenlexikon, “Case 2090”