DEUTZ-ALLIS 9130 vs VALMET 1502
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9130 and the 1502 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9130 | 1502 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 135.2 hp | 134 hp | — |
| Engine declared | K.H.D. BF6L 913 C-TI | VALMET 611 CS | differs |
| Displacement declared | 6.13 L | 6.60 L | +8% 1502 |
| Maximum torque declared | — | 406 lb·ft · 550 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry Rockford single-disc clutch | Dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 24.0 gpm · 90.7 L/min | — | — |
| Pressure declared | 3,771 psi · 260 bar | — | — |
| Three-point lift at ends declared | 7,211 lb · 3,271 kg | 7,871 lb · 3,570 kg | +9% 1502 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,300 lb · 5,579 kg | 16,469 lb · 7,470 kg | +34% 1502 |
| Wheelbase declared | 120.0 in · 3,048 mm | 101.3 in · 2,572 mm | +19% 9130 |
| Length declared | 188.0 in · 4,775 mm | 209.8 in · 5,330 mm | +12% 1502 |
| Width declared | 96.0 in · 2,438 mm | 83.7 in · 2,125 mm | +15% 9130 |
| Height declared | 122.0 in · 3,099 mm | 118.1 in · 3,000 mm | — |
| Ground clearance declared | 23.0 in · 584 mm | 16.5 in · 420 mm | +39% 9130 |
| Turning radius, braked declared | 13.4 ft · 4.09 m | — | — |
| Fuel tank declared | 360.3 qt · 341.0 L | 190.2 qt · 180.0 L | +89% 9130 |
DEUTZ-ALLIS 9130 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 9130”
- Source: Traktorenlexikon, “Deutz-Allis 9150”
VALMET 1502 sources
Source
- Source: Traktorenlexikon, “Valmet 1502”