DEUTZ-ALLIS 8050 vs Renault Temis 650

9 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1999–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 8050 and the Temis 650 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 8050 and Renault Temis 650, field by field
Field	8050	Temis 650	Gap
Engine
Engine power, claimed claimed	151.9 hp	151.9 hp	—
Engine declared	ALLIS-CHALMERS 670 TI	IVECO 8065.05.800 or 8065.05.805	differs
Displacement declared	6.98 L	5.86 L	+19% 8050
Maximum torque declared	—	411 lb·ft · 557 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	electrohydraulically operated wet multi-plate clutch	Dry LuK double clutch, type 355/355	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	22.0 gpm · 83.3 L/min	—	—
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift at ends declared	—	19,511 lb · 8,850 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	15,304 lb · 6,942 kg	12,974 lb · 5,885 kg	+18% 8050
Maximum permissible mass declared	—	21,164 lb · 9,600 kg	—
Wheelbase declared	106.0 in · 2,692 mm	107.0 in · 2,719 mm	—
Length declared	187.0 in · 4,750 mm	199.8 in · 5,074 mm	+7% Temis 650
Width declared	95.5 in · 2,426 mm	71.7 in · 1,820 mm	+33% 8050
Height declared	115.0 in · 2,921 mm	116.5 in · 2,960 mm	—
Ground clearance declared	22.0 in · 559 mm	21.1 in · 535 mm	—
Turning radius, braked declared	12.1 ft · 3.68 m	14.4 ft · 4.39 m	+19% Temis 650
Fuel tank declared	239.9 qt · 227.0 L	227.2 qt · 215.0 L	+6% 8050

Source

Source