DEUTZ-ALLIS 8030 vs Landini 14.500 (DT) "TL 24 N/G"

6 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1978–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 8030 and the 14.500 (DT) "TL 24 N/G" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 8030 and Landini 14.500 (DT) "TL 24 N/G", field by field
Field	8030	14.500 (DT) "TL 24 N/G"	Gap
Engine
Engine power, claimed claimed	132.1 hp	130.2 hp	—
Engine declared	ALLIS-CHALMERS 670 T	Perkins AT 6.354.4	differs
Displacement declared	6.98 L	5.80 L	+20% 8030
Maximum torque declared	—	359 lb·ft · 487 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Electro-hydraulically operated wet multi-disc clutch	Pedal-operated dry LUK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	22.0 gpm · 83.3 L/min	16.4 gpm · 62.0 L/min	+34% 8030
Pressure declared	3,771 psi · 260 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,451 lb · 5,194 kg	11,530 lb · 5,230 kg	—
Wheelbase declared	106.0 in · 2,692 mm	111.8 in · 2,840 mm	+5% 14.500 (DT) "TL 24 N/G"
Length declared	187.0 in · 4,750 mm	183.5 in · 4,660 mm	—
Width declared	93.4 in · 2,372 mm	91.7 in · 2,330 mm	—
Height declared	115.0 in · 2,921 mm	114.6 in · 2,910 mm	—
Ground clearance declared	21.0 in · 533 mm	20.1 in · 510 mm	—
Turning radius, braked declared	12.5 ft · 3.80 m	—	—
Fuel tank declared	239.9 qt · 227.0 L	190.2 qt · 180.0 L	+26% 8030

Source

Source