DEUTZ-ALLIS 8010 vs WHITE 6105

6 material differences · fewer than 12

Tractor one

DEUTZ-ALLIS 8010

1985–1988

No measured PTO figure

Tractor two

WHITE 6105

1992–1997

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (26%); they were not built in overlapping years (1985–1988; 1992–1997). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

6 material differences · 7 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 8010 and WHITE 6105, field by field
Field80106105Gap
Engine
Engine power, claimed claimed105.5 hp106.5 hp
Engine declaredALLIS-CHALMERS 649 TS.L.H. 1000.6 Wdiffers
Displacement declared4.93 L6.00 L+22% 6105
Maximum torque declared279 lb·ft · 378 N·m
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h
Clutch declaredPedal operated dry single disc clutch
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Pump flow declared45.0 gpm · 170.3 L/min
Pressure declared2,176 psi · 150 bar
Three-point lift at ends declared10,430 lb · 4,731 kg
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared12,630 lb · 5,729 kg10,013 lb · 4,542 kg+26% 8010
Maximum permissible mass declared14,330 lb · 6,500 kg
Wheelbase declared106.0 in · 2,692 mm107.5 in · 2,731 mm
Length declared187.0 in · 4,750 mm157.5 in · 4,000 mm+19% 8010
Width declared92.6 in · 2,352 mm87.0 in · 2,210 mm+6% 8010
Height declared114.0 in · 2,896 mm108.5 in · 2,755 mm
Ground clearance declared21.0 in · 533 mm20.1 in · 510 mm
Turning radius, braked declared12.0 ft · 3.67 m12.5 ft · 3.80 m
Fuel tank declared239.9 qt · 227.0 L221.9 qt · 210.0 L+8% 8010

DEUTZ-ALLIS 8010 sources

Source
  • Source: Traktorenlexikon, “Deutz-Allis 8010”

WHITE 6105 sources

Source
  • Source: Traktorenlexikon, “AGCO-White 6105”
  • Source: Traktorenlexikon, “White 6105”