9 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 80101985–1988No measured PTO figureTractor twoWHITE 2-1051974–1982No measured PTO figure
Which should you choose?
Read our verdict on the 8010 and the 2-105 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8010 | 2-105 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 105.5 hp | 105 hp | — |
| Engine declared | ALLIS-CHALMERS 649 T | Perkins AT 6.354 | differs |
| Displacement declared | 4.93 L | 5.80 L | +18% 2-105 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 8010 |
| Clutch declared | — | pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 45.0 gpm · 170.3 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,630 lb · 5,729 kg | 11,810 lb · 5,357 kg | +7% 8010 |
| Wheelbase declared | 106.0 in · 2,692 mm | 103.0 in · 2,616 mm | — |
| Length declared | 187.0 in · 4,750 mm | 178.3 in · 4,528 mm | — |
| Width declared | 92.6 in · 2,352 mm | 80.6 in · 2,048 mm | +15% 8010 |
| Ground clearance declared | 21.0 in · 533 mm | 25.4 in · 645 mm | +21% 2-105 |
| Turning radius, braked declared | 12.0 ft · 3.67 m | 12.9 ft · 3.93 m | +7% 2-105 |
| Fuel tank declared | 239.9 qt · 227.0 L | 128.9 qt · 122.0 L | +86% 8010 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 8010 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8010”
WHITE 2-105 sources
Source
- Source: Traktorenlexikon, “White 2-105”
- Source: Traktorenlexikon, “Massey Ferguson MF 1130”