DEUTZ-ALLIS 8010 vs Deutz-Fahr Agrotron 6.05
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8010 and the Agrotron 6.05 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 8010 | Agrotron 6.05 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 105.5 hp | 105.0 hp | — |
| Engine declared | ALLIS-CHALMERS 649 T | Deutz. BF6M 1012 E | differs |
| Displacement declared | 4.93 L | 4.79 L | — |
| Maximum torque declared | — | 306 lb·ft · 415 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 45.0 gpm · 170.3 L/min | 21.7 gpm · 82.3 L/min | +107% 8010 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,630 lb · 5,729 kg | 11,045 lb · 5,010 kg | +14% 8010 |
| Maximum permissible mass declared | — | 18,739 lb · 8,500 kg | — |
| Wheelbase declared | 106.0 in · 2,692 mm | 104.2 in · 2,647 mm | — |
| Length declared | 187.0 in · 4,750 mm | 178.0 in · 4,520 mm | — |
| Width declared | 92.6 in · 2,352 mm | 90.9 in · 2,310 mm | — |
| Height declared | 114.0 in · 2,896 mm | 112.4 in · 2,855 mm | — |
| Ground clearance declared | 21.0 in · 533 mm | 20.5 in · 520 mm | — |
| Turning radius, braked declared | 12.0 ft · 3.67 m | — | — |
| Fuel tank declared | 239.9 qt · 227.0 L | 274.7 qt · 260 L | +15% Agrotron 6.05 |
DEUTZ-ALLIS 8010 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8010”
Deutz-Fahr Agrotron 6.05 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.05”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 105 MK3”