6 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 71451987–1989No measured PTO figureTractor twoWHITE 84101998–2001No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (27%); they were not built in overlapping years (1987–1989; 1998–2001). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 7145 | 8410 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 144.0 hp | 145.0 hp | — |
| Engine declared | K.H.D. BF6L 913 T | CUMMINS B-5.9 T | differs |
| Displacement declared | 6.13 L | 5.89 L | — |
| Maximum torque declared | 386 lb·ft · 523 N·m | 479 lb·ft · 649 N·m | +24% 8410 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated wet multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 27.3 gpm · 103.3 L/min | 30.2 gpm · 114.3 L/min | +11% 8410 |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,905 lb · 5,400 kg | 15,130 lb · 6,863 kg | +27% 8410 |
| Wheelbase declared | 103.5 in · 2,629 mm | 108.3 in · 2,751 mm | — |
| Length declared | 187.8 in · 4,770 mm | 186.0 in · 4,724 mm | — |
| Width declared | 93.3 in · 2,370 mm | 98.2 in · 2,494 mm | — |
| Ground clearance declared | 24.4 in · 620 mm | — | — |
| Fuel tank declared | 264.2 qt · 250.0 L | 399.4 qt · 378.0 L | +51% 8410 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 7145 sources
- Source: Traktorenlexikon, “Deutz-Allis 7145”
- Source: Traktorenlexikon, “Deutz-Allis 7120”
WHITE 8410 sources
- Source: Traktorenlexikon, “White 8410”
- Source: Traktorenlexikon, “White 6710”
- Source: Traktorenlexikon, “AGCO-White 8410”