DEUTZ-ALLIS 7145 vs Massey Ferguson MF 8120 A

9 material differences · fewer than 12

Tractor one

1987–1989

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 7145 and the MF 8120 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7145 and Massey Ferguson MF 8120 A, field by field
Field	7145	MF 8120 A	Gap
Engine
Engine power, claimed claimed	144.0 hp	143.1 hp	—
Engine declared	K.H.D. BF6L 913 T	Perkins 1006.60 THR 3	differs
Displacement declared	6.13 L	5.99 L	—
Maximum torque declared	386 lb·ft · 523 N·m	406 lb·ft · 550 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% MF 8120 A
Clutch declared	—	Pedal-operated dry Valeo double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	27.3 gpm · 103.3 L/min	14.1 gpm · 53.3 L/min	+94% 7145
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	12,434 lb · 5,640 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	12,434 lb · 5,640 kg	—
Maximum permissible mass declared	—	25,353 lb · 11,500 kg	—
Wheelbase declared	103.5 in · 2,629 mm	109.3 in · 2,777 mm	+6% MF 8120 A
Length declared	187.8 in · 4,770 mm	199.7 in · 5,073 mm	+6% MF 8120 A
Width declared	93.3 in · 2,370 mm	90.8 in · 2,306 mm	—
Height declared	109.8 in · 2,789 mm	115.8 in · 2,941 mm	+5% MF 8120 A
Ground clearance declared	24.4 in · 620 mm	17.4 in · 442 mm	+40% 7145
Fuel tank declared	264.2 qt · 250.0 L	238.8 qt · 226.0 L	+11% 7145

Source

Source