DEUTZ-ALLIS 7110 vs Renault 120-14 TX

9 material differences · fewer than 12

Tractor one

1986–1989

No measured PTO figure

Tractor two

1986–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 7110 and the 120-14 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7110 and Renault 120-14 TX, field by field
Field	7110	120-14 TX	Gap
Engine
Engine power, claimed claimed	110.5 hp	109 hp	—
Engine declared	—	MWM D 226-6	—
Displacement declared	—	6.23 L	—
Maximum torque declared	281 lb·ft · 381 N·m	299 lb·ft · 406 N·m	+7% 120-14 TX
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	24.0 gpm · 90.8 L/min	16.1 gpm · 61.0 L/min	+49% 7110
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	19,511 lb · 8,850 kg	+70% 120-14 TX
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,700 lb · 4,400 kg	12,015 lb · 5,450 kg	+24% 120-14 TX
Maximum permissible mass declared	—	18,541 lb · 8,410 kg	—
Wheelbase declared	105.8 in · 2,687 mm	107.9 in · 2,740 mm	—
Length declared	176.8 in · 4,490 mm	181.2 in · 4,603 mm	—
Width declared	90.5 in · 2,299 mm	80.9 in · 2,055 mm	+12% 7110
Height declared	107.3 in · 2,725 mm	115.1 in · 2,923 mm	+7% 120-14 TX
Ground clearance declared	24.4 in · 620 mm	17.6 in · 447 mm	+39% 7110
Turning radius, braked declared	—	19.5 ft · 5.95 m	—
Fuel tank declared	123.6 qt · 117.0 L	194.4 qt · 184.0 L	+57% 120-14 TX

Source

Source