DEUTZ-ALLIS 7110 vs Massey Ferguson MF 2645

6 material differences · fewer than 12

Tractor one

1986–1989

No measured PTO figure

Tractor two

1985–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 7110 and the MF 2645 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7110 and Massey Ferguson MF 2645, field by field
Field	7110	MF 2645	Gap
Engine
Engine power, claimed claimed	110.5 hp	109 hp	—
Engine declared	—	Perkins A 6.354-4	—
Displacement declared	—	5.80 L	—
Maximum torque declared	281 lb·ft · 381 N·m	271 lb·ft · 367 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	24.0 gpm · 90.8 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	13,889 lb · 6,300 kg	+21% MF 2645
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,700 lb · 4,400 kg	12,412 lb · 5,630 kg	+28% MF 2645
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	105.8 in · 2,687 mm	107.3 in · 2,726 mm	—
Length declared	176.8 in · 4,490 mm	200.0 in · 5,080 mm	+13% MF 2645
Width declared	90.5 in · 2,299 mm	91.3 in · 2,320 mm	—
Height declared	107.3 in · 2,725 mm	113.4 in · 2,880 mm	+6% MF 2645
Ground clearance declared	24.4 in · 620 mm	18.5 in · 470 mm	+32% 7110
Turning radius, braked declared	—	16.1 ft · 4.90 m	—
Fuel tank declared	123.6 qt · 117.0 L	225.1 qt · 213.0 L	+82% MF 2645

Source

Source