DEUTZ-ALLIS 7110 vs John Deere 3255
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 7110 and the 3255 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 7110 | 3255 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 110.5 hp | 109.6 hp | — |
| Engine declared | — | John Deere 6.359 TL-007 | — |
| Displacement declared | — | 5.88 L | — |
| Maximum torque declared | 281 lb·ft · 381 N·m | 305 lb·ft · 413 N·m | +8% 3255 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Independent dry double clutch | Pedal-operated dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Closed centre | differs |
| Pump flow declared | 24.0 gpm · 90.8 L/min | 24.8 gpm · 93.9 L/min | — |
| Pressure declared | 3,481 psi · 240 bar | 2,321 psi · 160 bar | +50% 7110 |
| Three-point lift at ends declared | 11,464 lb · 5,200 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,700 lb · 4,400 kg | 11,729 lb · 5,320 kg | +21% 3255 |
| Wheelbase declared | 105.8 in · 2,687 mm | 101.7 in · 2,582 mm | — |
| Length declared | 176.8 in · 4,490 mm | 172.0 in · 4,370 mm | — |
| Width declared | 90.5 in · 2,299 mm | 90.2 in · 2,290 mm | — |
| Height declared | 107.3 in · 2,725 mm | 107.3 in · 2,726 mm | — |
| Ground clearance declared | 24.4 in · 620 mm | 16.5 in · 420 mm | +48% 7110 |
| Turning radius, braked declared | — | 14.5 ft · 4.41 m | — |
| Fuel tank declared | 123.6 qt · 117.0 L | 182.8 qt · 173.0 L | +48% 3255 |
DEUTZ-ALLIS 7110 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 7110”
John Deere 3255 sources
Source
- Source: Traktorenlexikon, “John Deere 3255”
- Source: Traktorenlexikon, “John Deere 3650”